FOSHAN SUOHER ELECTRICAL APPLIANCE CO., LTD
Monoblock DC Inverter Heat Pump How to install it?
Installation requires strict environmental conditions. The location should be dry and well-ventilated, avoiding direct sunlight and rainy/snowy weather during construction. Environmental temperature should be maintained between-10℃°C and +50℃°C with relative humidity not exceeding 90%. Outdoor installations must be securely fixed away from mechanical vibration sources. Electrical and piping connections should use R410A refrigerant, ensuring pipe seals to prevent leaks. Power cables must meet equipment power requirements with reliable grounding, preferably installed by professional electricians. Smart WiFi control systems require stable signals free from metal shielding interference. Regular inspections: Quarterly check key components like compressors and electronic expansion valves, clean condenser dust. Monitor refrigerant pressure to ensure no leaks, replenish or replace when necessary. Moisture and freeze protection: Activate automatic defrosting in winter to prevent ice buildup. Avoid water accumulation around outdoor units and keep drainage pipes clear. Long-term shutdown procedures: Power off and drain residual water to prevent corrosion. Cover with dustproof hood to prevent debris entry. Troubleshooting: Reduced efficiency: Filter blockage or insufficient refrigerant requires cleaning/refilling. Abnormal noise: Inspect fan/compressor for looseness, tighten fasteners or replace bearings. Safety compliance: Installation must follow standards like "Code for Quality Acceptance of Building Electrical Engineering Construction" (GB 50303). Always disconnect the power before maintenance to avoid live operation
